Recent content by jyatesmp

When I got my Clearview I had no issues. It had some protective plastic on it and said as long as that plastic was still on it I could return it if it did not fit properly. IMO one bad review would not be a reason to nix them. Now If you had several saying the same thing, I'd be all for...

Now for the changes. I put on a new front windshield from clearview, added lights to the front and back, exhaust, led's in console and guages, changed to hard saddle bags and floorboards

Figure I need to add my pics. First is how it looked when I bought the bike. After the pic with the bike loaded in the blue pickup is the changes I have made.

Has anyone replaced the right tab on the console with anything (aux light switch for example)? Or the thing that looks like a button below the run/stop switch and above the starter button on the right grip? I want to add some aux running lights up front but do not want them on all the time...

Unless you are racing or putting it on a dyno then you will feel nothing different. You will hear each cylender fire on that side of the bike. Little more sound little different note....I did the change like the differance. Others said the sound is for the better. If you do loose any power...

I have the 32" turnouts on my bike. I took out the crossover and I love the sound. No it will not bring back the 360 crank sound. I do think it still gives off a Thump. I like it and would say to do it.

Well I ordered the lights listed above and just put them on....love them.... hyave a fast blink issue but a new flasher relay from superbrightleds.com should fix that... I'll post the item number once I order it. And I need some red lenses for the rear.

I think I finally got this figured out (for me): For the front: (I will just hard wire this and glue it into my lens...this will act as a amber running light leaving the stock bulb to act as a amber turn signal) http://www.superbrightleds.com/cgi-bin/s...Fspecs%2FAE.htm Item...

This is what Kisan said: On Fri, Oct 22, 2010, <jyatesmp@#####.com> wrote: I was looking at your signal minder and I have some questions. What I am looking for is more lighting. As of now I have 2 lights on my motorcycle all the tie. Single head light and single tail light/brake light...

Has anyone figured out how to turn your front "turn only" lights to run/turn and the rear "turn only" to run/turn stop? I have found the SignalMinder, but they give you run/turn/stop in the front and rear. I don't like the fact that the front lights will do the stop feature. Sounds as if...

I am looking for red lense covers to replace my stock rear amber ones. I want to add the signalminder as it will add a run,turn,stop to the rear and a run,turn up front. I would like red out back. Who has stock red lense covers on the shelf? Do you have a link or something?

Anyone know where to find red lens covers (turn signal) for a TBA?

Big thanks to EDG1911 EPCO 32" turnouts with the crossover pipe cut and pluged. https://secure.filesanywhere.com/fs/v.aspx?v=8a69658e596470b99f9d

Big thanks to EDG1911 EPCO 32" turnouts with the crossover pipe cut and pluged. https://secure.filesanywhere.com/fs/v.aspx?v=8a69658e596470b99f9d

Ok had some rain sat and turns out it looks like it was the vent tube....I had the air box as stated and cut the bottom tank vent to about a 45 degree angle.... It did not stall. I'll need to try a few more times as this makes it 2 stalls 2 non-stalls, but hope thats it.